Corrugated flexible stainless steel hoses are widely accepted in the fire industry having been used on 3rd party approved flexible drops in commercial sprinklers for many years.
The fully stainless steel construction makes the hose completely heat and fire resistant. It does not rely on a fire resisting barrier to maintain its performance.
This provides a significant advantage over the CPVC pipework, traditionally used by the residential sprinkler industry.
Thermoplastic Hose Option
IPH Mist Suppression have also sourced an alternate hose for connecting our pump to our patented nozzles. We can also recommend using a more cost effective solution with the R7 thermoplastic hydraulic hose, with a max working pressure of 175 bar, more than double the requirement of the operating pressure of our custom made pump.
FYI: Thermoplastic hoses are common in both mobile and industrial equipment, and they are widely used in medium-to-high pressure hydraulic applications. Related products are often specified for handling compressed air and other gases, transporting chemicals, and in water-cleaning …perfect for our requirements.
Thermoplastic hydraulic hoses typically have an inner tube, one or more layers of reinforcement, and a protective cover.
A critical aspect of thermoplastic hose construction is how the tube, reinforcement and cover are bonded together. Thermal and chemical bonding methods ensure strong adhesion because thermoplastic materials can be re-melted during the production process. As a result, both the tube OD and cover ID materials can migrate between reinforcing fibers, creating a sturdy attachment between the three layers.
Our hose typically has a smooth internal surface that permits highly efficient flow and reduces flow losses. It also tends to offer low expansion even at maximum working pressure and with a protective inner and outer layer our hoses resist erosion, which helps maintain overall system cleanliness.
***Flexible stainless steel or ridged stainless steel can be used where hose in not protected by a fire rated barrier.
The stainless-steel fixtures and fittings when swaged on to our high pressure hose have a max W.P. of up to 300 bar.
Our portable swaging machines allow us to cut the precise length of hose required to navigate around a property, connecting the pump to our water mist nozzles.
Quality is important to us at IPH Mist Suppression. While preparing and acquiring all components to complete a water mist system for residential installation, we have taken decisive steps to ensure all premium fixtures and fittings which will be hidden once the installation is complete, are more than adequate for the job at hand.
All work is carried out by IPH's experienced team of engineers and is delivered to the highest standard.
Need help? We have engineers available 24 hours a day to ensure your systems are always at peak efficiency.
70 YEARS EXPERIENCE
The IPH Mist Suppression team have over 70 years combined experience in fire suppression and safety installation.
The Custom PUMP
The Patent NOZZLE
Latest Company News Articles & Case Studies
PAS 79, which was last revised in 2012, provided generic fire risk assessment guidance. However, the housing sector wanted more housing-specific recommendations to be developed. It was therefore decided to revise PAS 79, updating the existing PAS and renaming it as Part 1, and introducing a new, housing-specific, Part 2.
IPH Mist Suppression have been instructed to protect the artefacts on the mezzanine floor plus the residential area where the Maids live at Blenham Palace.
It has been recognised that fire suppression systems installed in buildings can reduce the risk to life and significantly reduce the degree of damage caused by fire within a building.